Creating a Bootable USB Flash Drive For Windows XP

Posted by Unknown 0 komentar
The ability to boot Windows XP from a USB Flash Drive (UFD) offers endless possibilities. For example, you might make an easy-to-use troubleshooting tool for booting and analyzing seemingly dead PCs. Or you could transport your favorite applications back and forth from home to work without having to install them on both PCs. However, before you can create a bootable UFD, you must clear a few hurdles. You saw that one coming didn’t you? The first hurdle is having a PC in which the BIOS will allow you to configure the USB port to act as a bootable device. The second hurdle is having a UFD that that will work as a bootable device and that’s large enough and fast enough to boot an operating system such as Windows XP. The third hurdle is finding a way to condense and install Windows XP on a UFD.

If you have a PC that was manufactured in the last several years, chances are that its BIOS will allow you to configure the USB port to act as a bootable device. If you have a good quality UFD that’s at least 512 KB and that was manufactured in the last couple of years, you’ve probably cleared the second hurdle. And once you’ve cleared those first two hurdles, the third one is a piece of cake. All you have to do is download and run some free software to create the bootable UFD. I’ll start by showing you how to determine whether your PC’s BIOS will support booting from USB and explain how to configure it to do so. Then, I’ll show you how to download and use the free software to create a bootable UFD running Windows XP Professional. Download free Creating a Bootable USB Flash Drive For Windows XP.pdf here

0 komentar:

Post a Comment