Ground Control Coil Over Conversion Install

Posted by Unknown 0 komentar
Raise and properly support back of car. I used a long metal bar that I had which reached across from one of the lower A-arms to the other and jacked up in the middle. I then put jack stands under the rear jacking points using jacking pucks.

Remove wheels On the passenger’s side of the car you will need to remove the brake pipe bracket so that the suspension can be lowered. It is attached by 2 10mm nuts. Support the lower control arm using a jack and remove the lower shock mounting bolt (21mm). Lower the jack and put it under the cradle. Remove the 2 cradle to body mounting bolts and washers. The Front is 24mm and the rear is 21mm. Download free Ground Control Coil Over Conversion Install.pdf here

0 komentar:

Post a Comment