GMS FUEL RAILS INSTALLATION INSTRUCTIONS
0
komentar
Applications :
- 1996-2007 Ford Mustang GT/Cobra Intake
- Return or Return Less Style with Fuel Pressure Sensor fitting
- Included in GMS Package
1 Driver side rail (99-07 rail may have sensor fitting)
1 Passenger side rail
1 GMS stock fuel line to -8N fitting (supply)
1 GMS stock fuel line to -8N fitting (return, use on return style setup only)
1 Accessory Pack – GMS #1401500 (Return Style 96-98 or
1 Accessory Pack – GMS #1401600 (Return less style 99+)
We recommend a certified auto technician for installation. You should have the following – a fire
extinguisher, eye goggles and fuel resistant gloves Do not over tighten mounting –an fittings! Doing so will void your warranty as this will overstress the mounting tabs, therefore causing the weld to weaken and/or break.
The OEM Fuel System is under pressure. This can cause serious injury if care is not taken to properly relieve it. You may open the gas cap to relieve the pressure. Some systems require additional steps using the Schrader valve. Another method is to let the vehicle sit overnight, as this allows ample time for the system to bleed down. Please refer to the service manual for more information.
Disconnect the negative battery cable to prevent accidental sparks with the fuel vapors that will occur with an open fuel system. Make sure the vehicle is well supported and the location is well ventilated with no open flames nearby like gas furnaces.
Download Ford Instruction Manual
1 Passenger side rail
1 GMS stock fuel line to -8N fitting (supply)
1 GMS stock fuel line to -8N fitting (return, use on return style setup only)
1 Accessory Pack – GMS #1401500 (Return Style 96-98 or
1 Accessory Pack – GMS #1401600 (Return less style 99+)
We recommend a certified auto technician for installation. You should have the following – a fire
extinguisher, eye goggles and fuel resistant gloves Do not over tighten mounting –an fittings! Doing so will void your warranty as this will overstress the mounting tabs, therefore causing the weld to weaken and/or break.
The OEM Fuel System is under pressure. This can cause serious injury if care is not taken to properly relieve it. You may open the gas cap to relieve the pressure. Some systems require additional steps using the Schrader valve. Another method is to let the vehicle sit overnight, as this allows ample time for the system to bleed down. Please refer to the service manual for more information.
Disconnect the negative battery cable to prevent accidental sparks with the fuel vapors that will occur with an open fuel system. Make sure the vehicle is well supported and the location is well ventilated with no open flames nearby like gas furnaces.
Download Ford Instruction Manual
Categories:
Autos
If You Like This Post, Share it With Your Friends & Peers
0 komentar:
Post a Comment